- How a scanning galvanometer works
- What is the classification of scanning galvanometer
- Laser, galvanometer and other core components of 3D printers are being replaced by domestic ones on the road
E-mail:support@hmmescan.com
TEL:0086-400-859-7098
Address:B705-2, Oil Pine Technology Building, No. 958 Honghua Road, Longhua District, Shenzhen
Input Aperture (mm) | 10 | 12 |
Tracking Error (ms) | 0.115 | 0.138 |
Repeated Positioning Accuracy (µrad) | <1 | <1 |
Zero Drift (µrad/K) | <15 | <15 |
Gain Drift(ppm/K) | <8 | <8 |
Long-term drift over 8 hours (mrad) | <0.1 | <0.1 |
1% Of Full Scale (ms) | 0.26 | 0.28 |
10% Of Full Scale (ms) | 1.128 | 0.81 |
Positioning Speed (m/s) | 25 | 20 |
Typical Scan Angle (°) | ±22 | ±22 |
Fine Processing Speed (rad/s) | <37.5 | <31.25 |
Zero Offset (mrad) | <5 | <5 |
Nonlinearity (%) | <0.1 | <0.1 |
Power Requirements | ±15VDC, ≥3A | ±15VDC, ≥3A |
Communication Protocol | XY2-100 /SH2-100(20bits) | XY2-100 /SH2-100(20bits) |
Operation Temperature (℃) | 25±10 | 25±10 |
File(s) Download:
OD05 X Axis 10mm Mounting Dimensions.pdf
OD05 X Axis 12mm Mounting Dimensions.pdf
OD05 Y Axis 10mm Mounting Dimensions.pdf
OD05 Y Axis 12mm Mounting Dimensions.pdf
Control Circuit Mounting Dimensions.pdf